Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection

kalimat1 I will provide interesting information for you, you can get a Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection at a very cheap price especially for This day. But before you continue reading, please see reviews about Amprobe ACDC-400 TRMS Digital Clamp Multimeter 400A AC/DC with VolTect Non-Contact Voltage Detection below

Features :

1. Digital clamp meter measures alternating current (AC) and direct current (DC) to 400 amp, AC voltage and DC voltage to 600 volts (V), resistance to 40 megaohms.
2. Relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings.
3. True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform.
4. Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V.

Description

The Amprobe ACDC-400 TRMS digital clamp meter is a true RMS (root mean square) sensing. It has a clamp that measures alternating current (AC) and direct current (DC) to 400 amp. The meter comes with detachable test leads that measure AC voltage and DC voltage to 600 volts (V). The clamp has two jaws that can close around a conductor up to 1. 1" (27 mm) in diameter to measure current or frequency without touching or interrupting the circuit. The relative zero mode stores a reading in memory to use as a zero point for subsequent readings. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. It has a liquid crystal display (LCD) that shows readings both in digits and on a bar graph. The LCD is backlit for visibility in low light. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and automatically selects select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4, 000-count resolution. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits. The unit comes with a soft vinyl carrying case. SpecificationsMaximum alternating current (AC) input400 ampMaximum direct current (DC), input400 ampMaximum AC voltage input600 volts (V)Maximum DC voltage input600VMaximum resistance detected40 megaohmsPower supply 1. 5V NEDA 24G or IEC R03 AAA batteries (two. 6 lb. /254 gMeter dimensions7. 9 x 2. 7 x 1. 6 inches/202 x 708 x 40 mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth.

Similar

Read more